渗碳体形态对高碳珠光体钢组织及性能的影响

为研究SWRS82B钢不同条件下进行的大过冷工艺所形成的渗碳体形态对珠光体亚结构组织及性能的影响,制定相关热处理工艺:将试样在880℃奥氏体化15 min后,以70,100,200℃/s的冷速过冷到300℃等温3~15s,之后升温至珠光体区等温1min,最后快冷至室温.通过SEM和TEM观察,以及MTS拉伸试验机得到的数据,结果表明,在过冷时间为3s的前提下,随着冷速的增长,渗碳体由完整片层状发生不同程度的碎化.在200℃/s时,渗碳体已经大面积碎化,并发现大量的纳米级渗碳体,抗拉强度表现为先降低后升高,伸长率持续升高.当冷却速度为70℃/s时,随着过冷时间的延长,抗拉强度和伸长率都表现为先降低后增大的特点.纳米渗碳体随着过冷时间的延长开始减少,到达15s时,开始出现了贝氏体组织.     

木枣多糖的理化特性研究

木枣经超声波辅助酸性缓冲液浸提、醇沉、脱蛋白和脱色工艺制得木枣多糖,测定其溶解性与单糖组成,采用Q2000型差示扫描量热仪和ZX7M-AR1000型流变仪研究木枣多糖的稳定性和流变性,为其在食品工业中的应用提供理论数据支持。实验结果表明,木枣多糖溶于热水,难溶于冷水,不溶于有机试剂；是由鼠李糖、阿拉伯糖、甘露糖、葡萄糖、半乳糖组成的杂多糖。热学特征分析表明木枣多糖具有较好的热稳定性；木枣多糖溶液为非牛顿假塑性流体,表现出剪切变稀的特性；因此木枣多糖适用于在食品生产工业中做稳定剂。     

改性化工污泥与煤的成浆性及燃烧性分析

选取两种方法对化工污泥进行改性并研究改性后的污泥添加量对污泥水煤浆(S-CWS)成浆性、流变性和燃烧性的影响,从而获得制备高浓度污泥水煤浆的工艺参数.结果表明:选用Na OH对污泥进行改性制备出的污泥水煤浆成浆性较好;改性污泥添加量在10%~20%,可以得到成浆性良好的污泥水煤浆;添加改性污泥的污泥水煤浆较普通水煤浆的燃烧性能增加.     

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

In recent years, graphene has attracted considerable research interest in all fields of science due to its unique properties. Its excellent mechanical properties lead it to be used in nano-composites for strength enhancement. This paper reports an Aluminum–Graphene Nanoplatelets(Al/GNPs)composite using a semi-powder method followed by hot extrusion. The effect of GNP nano-particle integration on tensile, compressive and hardness response of Al is investigated in this paper. It is demonstrated that 0.3 wt% Graphene Nanoplatelets distributed homogeneously in the matrix aluminum act as an effective reinforcing filler to prevent deformation. Compared to monolithic aluminum(in tension), Al–0.3 wt% GNPs composite exhibited higher 0.2% yield strength(+14.7%), ultimate tensile strength(+11.1%) and lower failure strain( -40.6%). Surprisingly, compared to monolithic Al(in compression), Al–0.3 wt% GNPs composite exhibited same 0.2% compressive yield strength and lower ultimate compression strength(- 7.8%),and lower failure strain(- 20.2%). The Al–0.3 wt% GNPs composite exhibited higher Vickers hardness compared to monolithic aluminum(+11.8%).Scanning electron microscopy(SEM), Energy-Dispersive X-ray Spectroscopy(EDS) and X-ray diffraction(XRD) were used to investigate the surface morphology, elemental percentage composition, and phase analysis, respectively.     

朝鲜崖柏生境及高生长规律分析

采用标准地调查法测定朝鲜崖柏的土壤特征、林下植被和高生长规律.结果表明:朝鲜崖柏生长于土层较薄且呈弱酸性的山地暗棕壤,不同标准地林下植被差异明显;不同标准地朝鲜崖柏树高的年生长量均呈逐年下降趋势.     

Preparation and Mechanical Properties of a Novel Textile Pad for Wound Debridement

Various types of wound debridement approaches are currently available in clinical practice such as autolytie, enzymatic. biodebridement, mechanical, and surgical debridemenl techniques. A critical look at these various options can explain their potential but also their limitations. In this study, a novel textile pad, which is composed of polyester filaments on the fleecy side and a bioeompatible coating on the opposite side, was made to provide a safe, inexpensive, easier and especially more efficient debridement process that can be used in all healthcare settings by all healthcare practitioners. Eighteen kinds of samples were prepared with different pile density, ground yarn count and coating amount. Dimensional morphology, stitch density, mass per unit area and mechanical properties were investigated to study the intrinsic relationship of structure and properties of textile pad for wound debridement. Results showed that tensile strength and suturing strength at piped site increased obviously with the increment of ground yarn count, while the amount of coating could also have a slight impact on these two properties. However, compressive load was mainly affected by pile density, with no obvious relation to ground yarn count and coating amount.     

A novel process for comprehensive utilization of vanadium slag

Traditional processes for treating vanadium slag generate a huge volume of solid residue and a large amount of harmful gas, which cause serious environmental problems. In this study, a new process for the comprehensive utilization of vanadium slag was proposed, wherein zeolite A and a V₂O₅/TiO₂ system were synthesized. The structural properties of the as-synthesized zeolite A and the V₂O₅/TiO₂ system were characterized using various experimental techniques, including X-ray diffraction, X-ray fluorescence, scanning electron microscopy, and infrared spectroscopy. The results reveal that zeolite A and the V₂O₅/TiO₂ system are successfully obtained with high purity. The results of gas adsorption measurements indicate that the prepared zeolite A exhibits high selectivity for CO₂ over N₂ and is a candidate material for CO₂ capture from flue-gas streams.     

水泥物理性能检测影响因素分析

总结了建设工程实验室水泥物理性能检测工作中普遍存在的问题,分析了水泥细度、凝结时间、胶砂强度等水泥物理性能检测的影响因素,并提出了消除这些影响、提高测试准确性的方法。     

Effect of Si on austenite stabilization,martensite morphology,and magnetic properties in Fe-26%Ni-x%Si alloys

The effect of Si on the austenite stabilization, martensite morphology, and magnetic properties in Fe-26%Ni-x%Si (x=3.5, 5, and 6) alloys have been studied by means of transmission electron microscopy (TEM) and M?ssbauer spectroscopy techniques. TEM observations reveal that the martensite morphology is closely dependent on the Si content. The volume fraction changes of martensite and austenite phases, the hyperfine magnetic field, and isomer shift values have been determined by Mssbauer spectroscopy. The M?ssbauer study reveals that the hyperfine magnetic field, the isomer shift values and the volume fraction of martensite decrease with increasing Si content.     

Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels

Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels were studied.To investigate the microstructure and mechanical properties,optical microscopy,scanning electron microscopy,X-ray diffraction,tensile test,and hardness test were used.The results show that the solution-annealing treatment in the cold-rolled steel redounds to the formation of sub-microcrystalline Fe2(Mo,Ti) Laves phase particles,which are stable at high temperatures.These secondary Laves phase particles prevent from recrystallization at high temperatures and correspond to semi-brittle fracture in the subsequent aging treatment.